JTX1000

Daihatsu L7 / Perodua Kelisa Autoflip Installation Guide

Perodua Kelisa Dasboard Fusebox

The side mirror connector. 5 wires for autoflip and power adjust.

Autoflip wires. 
The button change the polarity to flip and unflip side mirror.

In Perodua Kelisa with fully manual side mirror, factory left the  connector.
Find suitable wire and plug in.

Kelisa with autoflip button.

Door side mirror connector.


Original power distribution for side mirror. 
R02 from key switch.
RC8 is ACC power for side mirror.
Verify it with key on and off. 
We dont want any current leak due to wrong pin.

Wiring diagram for non auto flip side mirror. 
Simply add 2 wires for autoflip from switch for both sides.

8 comments:

  1. salam
    boleh x bro buat simple skematik diagram.. sbb tak sure wiring utk R02 & RC8.

    TQ

    ReplyDelete
  2. Bro... Sms saya utk schematic... 0194551036

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. Most of those cars can be found in Canada (except the Daihatsu), although Renaults and Peugeots are rare. 
    http://www.qtccars.com/used-daihatsu-cars.html

    ReplyDelete
  5. Slmt mlm,,,,ada kah siapa2 boleh bantu saya buay wiring auto adjuster level,,,,lampu passo..harap ada yg sudi mengajar saya.

    ReplyDelete
  6. hello,mahu tanya fog15 tail10a h/llh10a h/lrh10a tidak ada electrick di fuse box. Apa patut saya buat?

    ReplyDelete
  7. Signal tak berklip. Relay duk kat mana ye.

    ReplyDelete
  8. nak tnya ye,fuis power tu untuk pe ye??penting tak??

    ReplyDelete