JTX1000

How to Remove/Clean Dirty/Paint On Car Windows

Material: Sand paper grade 1000 and thinner(or petrol).
Don't forget white paper for you to see the effect.

Soak the sand paper with sand paper and gently sand the paint/dirty.
It is quite faster with thinner since it is paint remover.

See the difference? This DIY is recommend before the window is going to be  tinted.

This window in this tutorial is from Japanese (I get from used spare part).

Happy DIY!!

Honda Prelude BA5 Autoflip Controller/Relay

This is Honda Prelude BA5 JDM Autoflip side mirror controller  connector.
After some research and testing, the wiring functions as shown above.
For the switching signal (BLU/YEL) to flip and unflip, the signal depends on 12V pulse.
Tap 12V and release, it will flip/unflip.
You tap and release again it will unflip/flip.
The push button is needed to produce the pulse.

Honda Prelude BA5 Key Cylinder Reconfigure

First you need 2 or more set of cylinder lock before proceed.
The more the better  and the faster the process.
Take out the pins and compare the pins.
The cylinder lock must have flat configuration.
This configuration still dont match  the key. Try to swap the pin again.
The pin. Some pin need to be modified in order to fit the cylinder lock.
Different pin. Some metal and some cooper.

The different.
Cylinder serial number.
Now, it is flat. Test it with the outer housing.
Several test may be  done to confirm the configuration.
Clean it and grease it. Good Luck.

Fixing Kelisa Original Radio Volume Control

Perodua Car Radio

This is rotary encoder to adjust volume. It works by converting  rotation into pulses whether CW pulses or CCW pulses. If  you can find the rotary encoder exactly like this just buy it at reasonable cost or just buy new radio.

De-solder the circled. Use very good sucker or you will get frustration.

Removed rotary encoder from circuit board.

Find the teeth that touch the pulse copper track. Copper track is on the leftmost. 



Just like new. The volume control works very well. Don't know how long it will last since the rotary encoder is mechanical component.

Good Luck