 |
| Orange wire is connected to positive wire of radiator fan. |
 | |
|
 |
| Ground distribution terminal. It can be use as ground supply. |
 |
| Front bar was hammered to give some space for the condenser fan. |
 |
| 30A rated relay to supply current to the condenser fan. |
 |
| View from upside. |
 |
| Temporary installation before proper relay socket and fuse holder installed. |
 |
| From cat view. |
 |
| Condenser fan is stopped. |
 |
| High speed condenser fan is function properly without any vibration or unintended noise. |
 |
| About 7.5 Amp current is drawn to power up the forge racing fan or condenser fan. |
GREAT..how if we just cut the part on that bar to put the fan..maybe it would look nice
ReplyDeleteNice suggestion.
DeleteUnfortunately this method has little improvement on the AC.
Madi...nak tanya skit..wiring ikut warna atau kena reverse, sebab fan ni boleh reverse and normal spin kan?...
ReplyDeletebiru dengan biru, hitam dengan hitam ...atau
biru dengan hitam (reverse)
Saya pun tak ingat sangat warna wayar..
Deletefan ni boleh jadi reverse kalau wayar terbalik.....
ooo..so, cara ni xsolve jugak ke masalah myvi punya ekon ni eh
ReplyDeleteTak berapa solve....
Deletelagi pun current tinggi kalau fan ni.... 7.5Amp
Fan ni saiz 12inch eh? Kalau masuk 14inch lepas x?
ReplyDelete12 inch tu dah ngam2 untuk myvi...
Deletekalau 14 inch mungkin terlebih skit...
sesuai untuk kereta2 lama yang dah tak jual fan asal....
cuma bracket kena custom untuk kekemasan dan ketahanan,,,